DIY编程器网

标题: Diy8Programmer在ch347编程器上有时识别不到id问题，bug已解决 [打印本页]

---

作者: liyf    时间: 昨天 23:19
标题: Diy8Programmer在ch347编程器上有时识别不到id问题，bug已解决
在ch347编程器上在除了nor系列外的其他系列有时识别不到id问题
这个主要是菜单上有设置编程器速度选项，但是代码上有些功能项没有设置导致spispeed数值可能随机导致，而且大多数是无效值

1.   if (CurrentICParam.SpiCmd = SPI_CMD_25) and (AsProgrammer.Current_HW = CHW_CH347) then
   
2.   begin
   
3.     if MainForm.MenuCH347SPIClock60MHz.Checked then Speed := MainForm.MenuCH347SPIClock60MHz.Tag;
   
4.     if MainForm.MenuCH347SPIClock30MHz.Checked then Speed := MainForm.MenuCH347SPIClock30MHz.Tag;
   
5.     if MainForm.MenuCH347SPIClock15MHz.Checked then Speed := MainForm.MenuCH347SPIClock15MHz.Tag;
   
6.     if MainForm.MenuCH347SPIClock7_5MHz.Checked then Speed := MainForm.MenuCH347SPIClock7_5MHz.Tag;
   
7.     if MainForm.MenuCH347SPIClock3_75MHz.Checked then Speed := MainForm.MenuCH347SPIClock3_75MHz.Tag;
   
8.     if MainForm.MenuCH347SPIClock1_875MHz.Checked then Speed := MainForm.MenuCH347SPIClock1_875MHz.Tag;
   
9.     if MainForm.MenuCH347SPIClock937_5KHz.Checked then Speed := MainForm.MenuCH347SPIClock937_5KHz.Tag;
   
10.     if MainForm.MenuCH347SPIClock468_75KHz.Checked then Speed := MainForm.MenuCH347SPIClock468_75KHz.Tag;
    
11.   end;
    
12. 
    
13.   if (CurrentICParam.SpiCmd = SPI_CMD_Nand) and (AsProgrammer.Current_HW = CHW_CH347) then
    
14.   begin
    
15.     if MainForm.MenuCH347SPIClock60MHz.Checked then Speed := MainForm.MenuCH347SPIClock60MHz.Tag;
    
16.     if MainForm.MenuCH347SPIClock30MHz.Checked then Speed := MainForm.MenuCH347SPIClock30MHz.Tag;
    
17.     if MainForm.MenuCH347SPIClock15MHz.Checked then Speed := MainForm.MenuCH347SPIClock15MHz.Tag;
    
18.     if MainForm.MenuCH347SPIClock7_5MHz.Checked then Speed := MainForm.MenuCH347SPIClock7_5MHz.Tag;
    
19.     if MainForm.MenuCH347SPIClock3_75MHz.Checked then Speed := MainForm.MenuCH347SPIClock3_75MHz.Tag;
    
20.     if MainForm.MenuCH347SPIClock1_875MHz.Checked then Speed := MainForm.MenuCH347SPIClock1_875MHz.Tag;
    
21.     if MainForm.MenuCH347SPIClock937_5KHz.Checked then Speed := MainForm.MenuCH347SPIClock937_5KHz.Tag;
    
22.     if MainForm.MenuCH347SPIClock468_75KHz.Checked then Speed := MainForm.MenuCH347SPIClock468_75KHz.Tag;
    
23.   end;
    
24. 
    
25.   if (CurrentICParam.SpiCmd = SPI_CMD_93) and (AsProgrammer.Current_HW = CHW_CH347) then
    
26.   begin
    
27.     if MainForm.MenuCH347SPIClock60MHz.Checked then Speed := MainForm.MenuCH347SPIClock60MHz.Tag;
    
28.     if MainForm.MenuCH347SPIClock30MHz.Checked then Speed := MainForm.MenuCH347SPIClock30MHz.Tag;
    
29.     if MainForm.MenuCH347SPIClock15MHz.Checked then Speed := MainForm.MenuCH347SPIClock15MHz.Tag;
    
30.     if MainForm.MenuCH347SPIClock7_5MHz.Checked then Speed := MainForm.MenuCH347SPIClock7_5MHz.Tag;
    
31.     if MainForm.MenuCH347SPIClock3_75MHz.Checked then Speed := MainForm.MenuCH347SPIClock3_75MHz.Tag;
    
32.     if MainForm.MenuCH347SPIClock1_875MHz.Checked then Speed := MainForm.MenuCH347SPIClock1_875MHz.Tag;
    
33.     if MainForm.MenuCH347SPIClock937_5KHz.Checked then Speed := MainForm.MenuCH347SPIClock937_5KHz.Tag;
    
34.     if MainForm.MenuCH347SPIClock468_75KHz.Checked then Speed := MainForm.MenuCH347SPIClock468_75KHz.Tag;
    
35.   end;
    
36. 
    
37.    if (CurrentICParam.SpiCmd = SPI_CMD_45) and (AsProgrammer.Current_HW = CHW_CH347) then
    
38.    begin
    
39.      if MainForm.MenuCH347SPIClock60MHz.Checked then Speed := MainForm.MenuCH347SPIClock60MHz.Tag;
    
40.      if MainForm.MenuCH347SPIClock30MHz.Checked then Speed := MainForm.MenuCH347SPIClock30MHz.Tag;
    
41.      if MainForm.MenuCH347SPIClock15MHz.Checked then Speed := MainForm.MenuCH347SPIClock15MHz.Tag;
    
42.      if MainForm.MenuCH347SPIClock7_5MHz.Checked then Speed := MainForm.MenuCH347SPIClock7_5MHz.Tag;
    
43.      if MainForm.MenuCH347SPIClock3_75MHz.Checked then Speed := MainForm.MenuCH347SPIClock3_75MHz.Tag;
    
44.      if MainForm.MenuCH347SPIClock1_875MHz.Checked then Speed := MainForm.MenuCH347SPIClock1_875MHz.Tag;
    
45.      if MainForm.MenuCH347SPIClock937_5KHz.Checked then Speed := MainForm.MenuCH347SPIClock937_5KHz.Tag;
    
46.      if MainForm.MenuCH347SPIClock468_75KHz.Checked then Speed := MainForm.MenuCH347SPIClock468_75KHz.Tag;
    
47.    end;
    
48. 
    
49.     if (CurrentICParam.SpiCmd = SPI_CMD_Fram) and (AsProgrammer.Current_HW = CHW_CH347) then
    
50.     begin
    
51.       if MainForm.MenuCH347SPIClock60MHz.Checked then Speed := MainForm.MenuCH347SPIClock60MHz.Tag;
    
52.       if MainForm.MenuCH347SPIClock30MHz.Checked then Speed := MainForm.MenuCH347SPIClock30MHz.Tag;
    
53.       if MainForm.MenuCH347SPIClock15MHz.Checked then Speed := MainForm.MenuCH347SPIClock15MHz.Tag;
    
54.       if MainForm.MenuCH347SPIClock7_5MHz.Checked then Speed := MainForm.MenuCH347SPIClock7_5MHz.Tag;
    
55.       if MainForm.MenuCH347SPIClock3_75MHz.Checked then Speed := MainForm.MenuCH347SPIClock3_75MHz.Tag;
    
56.       if MainForm.MenuCH347SPIClock1_875MHz.Checked then Speed := MainForm.MenuCH347SPIClock1_875MHz.Tag;
    
57.       if MainForm.MenuCH347SPIClock937_5KHz.Checked then Speed := MainForm.MenuCH347SPIClock937_5KHz.Tag;
    
58.       if MainForm.MenuCH347SPIClock468_75KHz.Checked then Speed := MainForm.MenuCH347SPIClock468_75KHz.Tag;
    
59.     end;
    
60. 
    
61.      if (CurrentICParam.SpiCmd = SPI_CMD_95) and (AsProgrammer.Current_HW = CHW_CH347) then
    
62.      begin
    
63.        if MainForm.MenuCH347SPIClock60MHz.Checked then Speed := MainForm.MenuCH347SPIClock60MHz.Tag;
    
64.        if MainForm.MenuCH347SPIClock30MHz.Checked then Speed := MainForm.MenuCH347SPIClock30MHz.Tag;
    
65.        if MainForm.MenuCH347SPIClock15MHz.Checked then Speed := MainForm.MenuCH347SPIClock15MHz.Tag;
    
66.        if MainForm.MenuCH347SPIClock7_5MHz.Checked then Speed := MainForm.MenuCH347SPIClock7_5MHz.Tag;
    
67.        if MainForm.MenuCH347SPIClock3_75MHz.Checked then Speed := MainForm.MenuCH347SPIClock3_75MHz.Tag;
    
68.        if MainForm.MenuCH347SPIClock1_875MHz.Checked then Speed := MainForm.MenuCH347SPIClock1_875MHz.Tag;
    
69.        if MainForm.MenuCH347SPIClock937_5KHz.Checked then Speed := MainForm.MenuCH347SPIClock937_5KHz.Tag;
    
70.        if MainForm.MenuCH347SPIClock468_75KHz.Checked then Speed := MainForm.MenuCH347SPIClock468_75KHz.Tag;
    
71.      end;
    
72. 
    
73.       if (CurrentICParam.SpiCmd = SPI_CMD_24) and (AsProgrammer.Current_HW = CHW_CH347) then
    
74.       begin
    
75.         if MainForm.MenuCH347SPIClock60MHz.Checked then Speed := MainForm.MenuCH347SPIClock60MHz.Tag;
    
76.         if MainForm.MenuCH347SPIClock30MHz.Checked then Speed := MainForm.MenuCH347SPIClock30MHz.Tag;
    
77.         if MainForm.MenuCH347SPIClock15MHz.Checked then Speed := MainForm.MenuCH347SPIClock15MHz.Tag;
    
78.         if MainForm.MenuCH347SPIClock7_5MHz.Checked then Speed := MainForm.MenuCH347SPIClock7_5MHz.Tag;
    
79.         if MainForm.MenuCH347SPIClock3_75MHz.Checked then Speed := MainForm.MenuCH347SPIClock3_75MHz.Tag;
    
80.         if MainForm.MenuCH347SPIClock1_875MHz.Checked then Speed := MainForm.MenuCH347SPIClock1_875MHz.Tag;
    
81.         if MainForm.MenuCH347SPIClock937_5KHz.Checked then Speed := MainForm.MenuCH347SPIClock937_5KHz.Tag;
    
82.         if MainForm.MenuCH347SPIClock468_75KHz.Checked then Speed := MainForm.MenuCH347SPIClock468_75KHz.Tag;
    
83.       end;
    
84. 
    
85.        if (CurrentICParam.SpiCmd = SPI_CMD_KB) and (AsProgrammer.Current_HW = CHW_CH347) then
    
86.        begin
    
87.          if MainForm.MenuCH347SPIClock60MHz.Checked then Speed := MainForm.MenuCH347SPIClock60MHz.Tag;
    
88.          if MainForm.MenuCH347SPIClock30MHz.Checked then Speed := MainForm.MenuCH347SPIClock30MHz.Tag;
    
89.          if MainForm.MenuCH347SPIClock15MHz.Checked then Speed := MainForm.MenuCH347SPIClock15MHz.Tag;
    
90.          if MainForm.MenuCH347SPIClock7_5MHz.Checked then Speed := MainForm.MenuCH347SPIClock7_5MHz.Tag;
    
91.          if MainForm.MenuCH347SPIClock3_75MHz.Checked then Speed := MainForm.MenuCH347SPIClock3_75MHz.Tag;
    
92.          if MainForm.MenuCH347SPIClock1_875MHz.Checked then Speed := MainForm.MenuCH347SPIClock1_875MHz.Tag;
    
93.          if MainForm.MenuCH347SPIClock937_5KHz.Checked then Speed := MainForm.MenuCH347SPIClock937_5KHz.Tag;
    
94.          if MainForm.MenuCH347SPIClock468_75KHz.Checked then Speed := MainForm.MenuCH347SPIClock468_75KHz.Tag;
    
95.        end;
    

复制代码

这样改动后，不管是选择哪个型号下都可以通过识别id来找到对应的芯片型号

bug已解决

---

欢迎光临 DIY编程器网 (http://www.diybcq.com/)

Powered by Discuz! X3.2