<?xml version="1.0" encoding="gbk"?>
<rss version="2.0">
  <channel>
    <title>DIY编程器网 - 回流焊、焊台</title>
    <link>http://www.diybcq.com/forum-106-1.html</link>
    <description>Latest 20 threads of 回流焊、焊台</description>
    <copyright>Copyright(C) DIY编程器网</copyright>
    <generator>Discuz! Board by Comsenz Inc.</generator>
    <lastBuildDate>Fri, 17 Apr 2026 15:10:09 +0000</lastBuildDate>
    <ttl>60</ttl>
    <image>
      <url>http://www.diybcq.com/static/image/common/logo_88_31.gif</url>
      <title>DIY编程器网</title>
      <link>http://www.diybcq.com/</link>
    </image>
    <item>
      <title>想搞500W高频焊台，有成熟方案的，大家一起探讨</title>
      <link>http://www.diybcq.com/thread-148759-1-1.html</link>
      <description><![CDATA[想搞500W高频焊台，有成熟方案的，大家一起探讨!!!
下面全桥方案，有做成功的吗？]]></description>
      <category>回流焊、焊台</category>
      <author>szvact</author>
      <pubDate>Wed, 18 Mar 2026 05:45:23 +0000</pubDate>
    </item>
    <item>
      <title>收了个tpk as-600焊台：自制烙铁手柄2</title>
      <link>http://www.diybcq.com/thread-147861-1-1.html</link>
      <description><![CDATA[收了个tpk as-600焊台：自制烙铁手柄2]]></description>
      <category>回流焊、焊台</category>
      <author>gan4036</author>
      <pubDate>Tue, 13 Jan 2026 12:39:46 +0000</pubDate>
    </item>
    <item>
      <title>T962a的按键坏了，网上居然找不到替代的，自己做个</title>
      <link>http://www.diybcq.com/thread-147770-1-1.html</link>
      <description><![CDATA[前段时间T962a的按键坏了，网上居然找不到替代的，买了个通用的薄膜按键，但是按键间距没有2cm，不通用，一直都是挂着用的
但是用了段时间后，按键又出问题了，薄膜吸水，按起来有时失灵
干脆自己画板做个，到时看怎么将原先的铁壳钻孔安装

板子设计有螺钉固定孔
 ...]]></description>
      <category>回流焊、焊台</category>
      <author>liyf</author>
      <pubDate>Wed, 04 Jun 2025 04:00:48 +0000</pubDate>
    </item>
    <item>
      <title>超级电容点焊机 省钱办法 铝排伺候</title>
      <link>http://www.diybcq.com/thread-147270-1-1.html</link>
      <description><![CDATA[铝排很便宜，效果很不错 大家可以试试]]></description>
      <category>回流焊、焊台</category>
      <author>dm8510</author>
      <pubDate>Thu, 13 Jun 2024 05:48:00 +0000</pubDate>
    </item>
    <item>
      <title>T962a温度偏低问题维修</title>
      <link>http://www.diybcq.com/thread-147039-1-1.html</link>
      <description><![CDATA[最近t962a出现点问题，导致生产罢工了，唉，休息了好几天
最主要表现就是板子过回流焊后，有些地方锡膏都没融化完整或者同一板上有些区域锡膏刚融化成珠，或者有些零件漂浮在焊锡上没焊接，再或者焊锡面不光洁，明显颗粒感
导致这些问题的就是温度没上去
拆开抽屉后 ...]]></description>
      <category>回流焊、焊台</category>
      <author>liyf</author>
      <pubDate>Mon, 28 Aug 2023 03:27:14 +0000</pubDate>
    </item>
    <item>
      <title>发个从块可 高频焊台ATMEGA8芯片考出来的程序</title>
      <link>http://www.diybcq.com/thread-145587-1-1.html</link>
      <description><![CDATA[从203 205里面考出来的，自己重新写到新的芯片启动不了，不知道字位怎样设置 ！程序里面有FLASH，ROM，字三部分，PRJ工程文件包含了这三个。我是用西尔特5000直接从芯片里面考出来的，不知道里面内容对不对。有哪位大佬知道的可以告知一下如何设置字，程序内容对不对 ...]]></description>
      <category>回流焊、焊台</category>
      <author>138liuxin</author>
      <pubDate>Tue, 08 Nov 2022 01:50:14 +0000</pubDate>
    </item>
    <item>
      <title>热风焊台手柄 858d 8786手柄航插接线图</title>
      <link>http://www.diybcq.com/thread-144084-1-1.html</link>
      <description><![CDATA[热风焊台手柄 如858d 8786手柄等，很多都牵着尾巴，所以出现了直接用航插转接的
下面就是接线图，供参考]]></description>
      <category>回流焊、焊台</category>
      <author>liyf</author>
      <pubDate>Mon, 29 Apr 2019 02:46:44 +0000</pubDate>
    </item>
    <item>
      <title>Soldering station using inviot U1, an arduino compatible board</title>
      <link>http://www.diybcq.com/thread-141043-1-1.html</link>
      <description><![CDATA[Soldering station using
.
InvIoT U1an (Arduino compatible) board.
.
I am using the InvIoT U1 board to build a soldering station. There is a sensor with a wire connecting to the base of the soldering station with theInvIoT U1. That way ...]]></description>
      <category>回流焊、焊台</category>
      <author>liyf</author>
      <pubDate>Wed, 01 Mar 2017 04:52:50 +0000</pubDate>
    </item>
    <item>
      <title>Toast-R-Reflow: Yet another toaster reflow oven conversion</title>
      <link>http://www.diybcq.com/thread-141042-1-1.html</link>
      <description><![CDATA[Everybody and their brother has converted a toaster oven into a surface mount soldering \&quot;reflow\&quot; oven. I looked long and hard and found that I didn\'t like any one iteration of the project, so I did my own thing.

 I call it \&quot;Toa ...]]></description>
      <category>回流焊、焊台</category>
      <author>liyf</author>
      <pubDate>Wed, 01 Mar 2017 04:50:12 +0000</pubDate>
    </item>
    <item>
      <title>T-962回流焊固件，开源的</title>
      <link>http://www.diybcq.com/thread-141028-1-1.html</link>
      <description><![CDATA[接上篇：
T962A SMD Reflow Oven Fix/Hack
http://www.diybcq.com/thread-141027-1-1.html
(出处: DIY编程器网)

这个是T-962回流焊开源的固件，基于lpc2000开发的，也有用stm32做的那种就不适用了
供参考下]]></description>
      <category>回流焊、焊台</category>
      <author>liyf</author>
      <pubDate>Sun, 19 Feb 2017 09:46:27 +0000</pubDate>
    </item>
    <item>
      <title>T962A SMD Reflow Oven Fix/Hack</title>
      <link>http://www.diybcq.com/thread-141027-1-1.html</link>
      <description><![CDATA[I\'ve recently purchased a popular T962A SMD reflow oven. The reviews are split on this oven - some find it to be quite acceptable, while others find it completely useless. After much researching, I decided to give it a try.

 (Feel free t ...]]></description>
      <category>回流焊、焊台</category>
      <author>liyf</author>
      <pubDate>Sun, 19 Feb 2017 09:31:21 +0000</pubDate>
    </item>
    <item>
      <title>Home built SMD Reflow oven</title>
      <link>http://www.diybcq.com/thread-141026-1-1.html</link>
      <description><![CDATA[Home built SMD Reflow oven                
DISCLAIMER: This design is experimental, so if you decide to build one yourself then you are on your own, I can\'t be held responsible for any problems/issues/damage/injury that may occur if you decide to fo ...]]></description>
      <category>回流焊、焊台</category>
      <author>liyf</author>
      <pubDate>Sun, 19 Feb 2017 09:20:37 +0000</pubDate>
    </item>
    <item>
      <title>SMD Reflow Oven Project</title>
      <link>http://www.diybcq.com/thread-141025-1-1.html</link>
      <description><![CDATA[SMD Reflow Oven Projectadr1an — Fri, 04/11/2011 - 2:23am


BackgroundThis project is to convert a fairly ordinary (read below - there is some caveats) Toaster Oven into an SMD Reflow Oven. To accomplish this, I\'ve decided to combine an Arduino Me ...]]></description>
      <category>回流焊、焊台</category>
      <author>liyf</author>
      <pubDate>Sun, 19 Feb 2017 09:16:54 +0000</pubDate>
    </item>
    <item>
      <title>reflow oven（另一篇改装）</title>
      <link>http://www.diybcq.com/thread-141024-1-1.html</link>
      <description><![CDATA[I need a reflow oven for lead-free soldering Surface Mounted Device (SMD or SMT) technology.                                            Some of my projects have more  ...]]></description>
      <category>回流焊、焊台</category>
      <author>liyf</author>
      <pubDate>Sun, 19 Feb 2017 09:11:11 +0000</pubDate>
    </item>
    <item>
      <title>SMD Soldering Reflow Oven (ControLeo2 based)</title>
      <link>http://www.diybcq.com/thread-141023-1-1.html</link>
      <description><![CDATA[I\'m sure you\'ve seen a ton of these by now. If you are a maker then this is one tool that you MUST have. Its convenient fast and you can even do a small production batch with these. If you are completely new to SMD soldering then search for r ...]]></description>
      <category>回流焊、焊台</category>
      <author>liyf</author>
      <pubDate>Sun, 19 Feb 2017 08:49:48 +0000</pubDate>
    </item>
    <item>
      <title>Toaster oven reflow controller</title>
      <link>http://www.diybcq.com/thread-141022-1-1.html</link>
      <description><![CDATA[Toaster oven reflow controllerDate 2013-09-08 

Almost finished controller board. This one was soldered by hand.
IntroductionNowadays many of the most \&quot;exiting\&quot; chips come only in leadless packages, such as BGA and QFN which are hard or impossible ..]]></description>
      <category>回流焊、焊台</category>
      <author>liyf</author>
      <pubDate>Sun, 19 Feb 2017 08:42:33 +0000</pubDate>
    </item>
    <item>
      <title>Conversion of a toaster oven into a SMT reflow oven</title>
      <link>http://www.diybcq.com/thread-141021-1-1.html</link>
      <description><![CDATA[Conversion of a toaster oven into a SMT reflow oven.

Having got fed up of hand soldering SMT components (and being unable toafford assembly at a C.E.M.) I thought I would have a go at a toasteroven conversion.
There are many such conversions on t ...]]></description>
      <category>回流焊、焊台</category>
      <author>liyf</author>
      <pubDate>Sun, 19 Feb 2017 08:15:19 +0000</pubDate>
    </item>
    <item>
      <title>ControLeo2 Reflow Oven Controller</title>
      <link>http://www.diybcq.com/thread-141020-1-1.html</link>
      <description><![CDATA[回流焊控制器，开源的，方便自制


ControLeo2 Reflow Oven Controller  
ControLeo2 reflow ovens meet demanding requirements
 Must be capable of high-temperature lead-free reflow (240°C) as well as leaded reflow
 Must be capable of reflowing a 8\&quot;  ...]]></description>
      <category>回流焊、焊台</category>
      <author>liyf</author>
      <pubDate>Sun, 19 Feb 2017 07:17:35 +0000</pubDate>
    </item>
    <item>
      <title>Making A SMD Reflow Oven</title>
      <link>http://www.diybcq.com/thread-141019-1-1.html</link>
      <description><![CDATA[I have been an electronics hobbyist for many years and have always stuck with through-hole components when making a project. However as time goes by, not only are more and more components are becoming available only in SMD (surface moun ...]]></description>
      <category>回流焊、焊台</category>
      <author>liyf</author>
      <pubDate>Sun, 19 Feb 2017 06:41:27 +0000</pubDate>
    </item>
    <item>
      <title>『转』赛克852D+焊台实绘图及常见故障检修</title>
      <link>http://www.diybcq.com/thread-140694-1-1.html</link>
      <description><![CDATA[YH-852D+V3-FJ焊台控制板是赛克YH-852D+V3的升级产品，外围元件基本一样，只是在单片控制的10输出端做了改进，实绘电路如图1所示，YH-852D+V3焊台控制板实物如图2所示，下面介绍其常见故障的检修。



    1.焊台烙铁不发热
    首先要确定是主机坏还是烙铁手柄坏 ...]]></description>
      <category>回流焊、焊台</category>
      <author>liyf</author>
      <pubDate>Sun, 16 Oct 2016 06:36:12 +0000</pubDate>
    </item>
  </channel>
</rss>