<?xml version="1.0" encoding="gbk"?>
<rss version="2.0">
  <channel>
    <title>DIY编程器网 - 美信达拉斯1-wire编程器</title>
    <link>http://www.diybcq.com/forum-99-1.html</link>
    <description>Latest 20 threads of 美信达拉斯1-wire编程器</description>
    <copyright>Copyright(C) DIY编程器网</copyright>
    <generator>Discuz! Board by Comsenz Inc.</generator>
    <lastBuildDate>Thu, 09 Apr 2026 04:46:53 +0000</lastBuildDate>
    <ttl>60</ttl>
    <image>
      <url>http://www.diybcq.com/static/image/common/logo_88_31.gif</url>
      <title>DIY编程器网</title>
      <link>http://www.diybcq.com/</link>
    </image>
    <item>
      <title>美信达拉斯1-wire编程器读写DS2432（8）-状态保护设置</title>
      <link>http://www.diybcq.com/thread-148764-1-1.html</link>
      <description><![CDATA[当然ds2432也有保护设置的

看这个可能不是很明白，对应到下图就明白了

直接看图上标识，就不用文字表示了
一旦设置了密码保护字节处为55，那芯片的密码就不能修改了
设置数据页保护55，那么page0～3都不能修改，只能读]]></description>
      <category>美信达拉斯1-wire编程器</category>
      <author>liyf</author>
      <pubDate>Tue, 31 Mar 2026 12:50:36 +0000</pubDate>
    </item>
    <item>
      <title>美信达拉斯1-wire编程器读写DS2432（7）-使用onewireviewer批量写入</title>
      <link>http://www.diybcq.com/thread-148763-1-1.html</link>
      <description><![CDATA[使用onewireviewer整页写入ds2432也摸索出来了
先切换到ds1961s sha标签页设置访问密码，再切换到eeprom数据页操作即可
1、选ds1961s sha标签页

2、设置操作密码（load first secret）

3、将密码加载到容器中（set container secret）

4、切换到eeprom标签页 ...]]></description>
      <category>美信达拉斯1-wire编程器</category>
      <author>liyf</author>
      <pubDate>Tue, 31 Mar 2026 12:16:09 +0000</pubDate>
    </item>
    <item>
      <title>美信达拉斯1-wire编程器读写DS2432（6）-使用onewireviewer</title>
      <link>http://www.diybcq.com/thread-148762-1-1.html</link>
      <description><![CDATA[直接使用onewireviewer写ds2432终于成功了，不知以前为什么成功不了
而且这次直接使用密码操作的

写入的前8个字节11 ff ff ff ff ff ff ff
全新芯片默认密码FF FF FF FF FF FF FF FF（8个FF）
下面就说说操作步骤：
1、设置操作密码（load first secret）

2、 ...]]></description>
      <category>美信达拉斯1-wire编程器</category>
      <author>liyf</author>
      <pubDate>Tue, 31 Mar 2026 11:32:23 +0000</pubDate>
    </item>
    <item>
      <title>为gxcas的TDFN6封装芯片设计的座子，适用gx2431t，gx28e01t等</title>
      <link>http://www.diybcq.com/thread-147834-1-1.html</link>
      <description><![CDATA[这是gxcas一线芯片兼容tsoc6封装的无引脚封装，原先的tsoc6座子不能直接使用，限位框太大了点

适用gx2431t，gx28e01t等

芯片样式，放入座子后刚刚好


座子型号，延续dfn6名称，4mm*4mm，1.27mm脚间距]]></description>
      <category>美信达拉斯1-wire编程器</category>
      <author>liyf</author>
      <pubDate>Sun, 19 Oct 2025 11:56:06 +0000</pubDate>
    </item>
    <item>
      <title>为gxcas的DFN6封装芯片设计的座子，适用gx2505d，gx2431d等</title>
      <link>http://www.diybcq.com/thread-147819-1-1.html</link>
      <description><![CDATA[gxcas的一线芯片相比达拉斯的多了几种封装形式，如gx2505d，gx2431d等这类采用DFN6封装的

达拉斯是没有这种封装的，所以我们专门设计了个座子

这个封装采用的是DFN6 4mm*4mm 0.95mm脚间距的封装形式，所以不能直接用tsoc6改（gx2431t这个是TDFN6 4*4 1.27mm的所以 ...]]></description>
      <category>美信达拉斯1-wire编程器</category>
      <author>liyf</author>
      <pubDate>Fri, 19 Sep 2025 06:12:27 +0000</pubDate>
    </item>
    <item>
      <title>英飞凌芯片编程器</title>
      <link>http://www.diybcq.com/thread-147788-1-1.html</link>
      <description><![CDATA[谁有英飞凌芯片编程器，我有很多维修的板卡，上面基本都是英飞凌的芯片，需要读取芯片内容和下载到芯片！]]></description>
      <category>美信达拉斯1-wire编程器</category>
      <author>wangyaoyin</author>
      <pubDate>Mon, 30 Jun 2025 23:47:00 +0000</pubDate>
    </item>
    <item>
      <title>美信达拉斯1-wire编程器v1.4批量遇到个问题，单独设计个gx25xx转接板</title>
      <link>http://www.diybcq.com/thread-147766-1-1.html</link>
      <description><![CDATA[由于加入rc电路，为了兼容gx25xx的芯片，减少转接板使用，但是在批量时发现有一定概率出现不稳定的现象
就是兼容gx的芯片了，但是对达拉斯的芯片却出现有部分不稳定的现象，这样一来就导致测试时间加长，调整rc值等情况
虽然只有百分之几的概率，但是对于批量来说，为 ...]]></description>
      <category>美信达拉斯1-wire编程器</category>
      <author>liyf</author>
      <pubDate>Tue, 27 May 2025 08:37:35 +0000</pubDate>
    </item>
    <item>
      <title>美信达拉斯1-wire编程器v1.4可以直接用onewireviewer读写ds2505</title>
      <link>http://www.diybcq.com/thread-147764-1-1.html</link>
      <description><![CDATA[美信达拉斯1-wire编程器v1.4版做了改动，可以直接用onewireviewer读写ds2505，当然也可以读写gx2505，其他25系列也该没问题
速度上相对于1.3版要快一点，具体快多少没有实际对比，这个感官上就能感觉到，以gx2505刷新到显示数据，v1.4的大概4个心跳，v1.3的大概6个心跳 ...]]></description>
      <category>美信达拉斯1-wire编程器</category>
      <author>liyf</author>
      <pubDate>Mon, 26 May 2025 00:21:53 +0000</pubDate>
    </item>
    <item>
      <title>基于DS2432的USB口1-Wire总线适配器的设计</title>
      <link>http://www.diybcq.com/thread-147744-1-1.html</link>
      <description><![CDATA[　　基于DS2432的USB口1-Wire总线适配器的设计　　摘要：DS2432是美国美信公司生产的一种自动加密电路，内部含有SHA-1加密引擎，可使硬件设计更安全可靠。根据DS2432的工作原理，提出一种带软件加密狗的1-Wire总线USB口适配器的设计方法，同时介绍硬件电路，对电路进行 ...]]></description>
      <category>美信达拉斯1-wire编程器</category>
      <author>liyf</author>
      <pubDate>Wed, 09 Apr 2025 10:29:08 +0000</pubDate>
    </item>
    <item>
      <title>插入串口线点软件进不去</title>
      <link>http://www.diybcq.com/thread-147742-1-1.html</link>
      <description><![CDATA[应该是缺少驱动，这个驱动在哪里可以下载啊？USB Serial port]]></description>
      <category>美信达拉斯1-wire编程器</category>
      <author>1781225299</author>
      <pubDate>Wed, 09 Apr 2025 04:40:13 +0000</pubDate>
    </item>
    <item>
      <title>求助各位大佬，芯片丝印40+1101的这个芯片是什么型号</title>
      <link>http://www.diybcq.com/thread-147475-1-1.html</link>
      <description><![CDATA[如图：求助各位大佬，芯片丝印40+1101的这个芯片是什么型号，已知是一个onewire的芯片，在原来的板子上显示1脚GND，2脚OW，我用9097U没读到，也没查到是什么芯片]]></description>
      <category>美信达拉斯1-wire编程器</category>
      <author>bb2222</author>
      <pubDate>Tue, 11 Mar 2025 05:08:03 +0000</pubDate>
    </item>
    <item>
      <title>我们设计的usb版ds9097e续1</title>
      <link>http://www.diybcq.com/thread-147416-1-1.html</link>
      <description><![CDATA[上次设计的板子前几天就打样好了，找个时间焊接了块测试板

还是遇到不少问题的
首先焊接好后插上usb居然不识别，后面排查居然是一个三极管基极虚焊导致，上电就出现微短路的情况，导致5v电压只有3.6v，哎

解决这个问题，插上能识别到端口了
但是用Default 1-Wir ...]]></description>
      <category>美信达拉斯1-wire编程器</category>
      <author>liyf</author>
      <pubDate>Mon, 20 Jan 2025 01:34:14 +0000</pubDate>
    </item>
    <item>
      <title>我们设计的usb版ds9097e</title>
      <link>http://www.diybcq.com/thread-147410-1-1.html</link>
      <description><![CDATA[有些软件使用ds9097e编程器，我们设计了个usb版的
外观和我们的ds9097u一样，接口也一样

当然也集成了12v电路，不用外界电源

使用的外壳也一样
等到样板焊接测试看看效果]]></description>
      <category>美信达拉斯1-wire编程器</category>
      <author>liyf</author>
      <pubDate>Tue, 14 Jan 2025 15:03:29 +0000</pubDate>
    </item>
    <item>
      <title>ds9097e串口适配器电路</title>
      <link>http://www.diybcq.com/thread-147377-1-1.html</link>
      <description><![CDATA[ds9097e串口适配器

这个主要是支持12v的芯片，需要外接12v电源]]></description>
      <category>美信达拉斯1-wire编程器</category>
      <author>liyf</author>
      <pubDate>Tue, 31 Dec 2024 04:06:24 +0000</pubDate>
    </item>
    <item>
      <title>ds9097u做点改板，支持gx2505的读写</title>
      <link>http://www.diybcq.com/thread-147384-1-1.html</link>
      <description><![CDATA[由于gx2505的编程电压低点，所以得加入rc电路才行

为了方便，直接改板，需要时就安装上

当然为了板子适用性更强，扩展了下电路可以使用其他主控芯片

当然有些用户建议加上上电灯亮，所以改了电阻跳线，这样一来只要安装不同的零件即可

这样就不需要扩展电路 ...]]></description>
      <category>美信达拉斯1-wire编程器</category>
      <author>liyf</author>
      <pubDate>Mon, 09 Dec 2024 07:07:57 +0000</pubDate>
    </item>
    <item>
      <title>读写达拉斯DS1742W，有适合的编程器吗？</title>
      <link>http://www.diybcq.com/thread-147380-1-1.html</link>
      <description><![CDATA[大家好，经常读写DS1742W 1744P 1220Y等等NV RAM，有没有比较适合的型号？主要考虑经济性，谢谢！]]></description>
      <category>美信达拉斯1-wire编程器</category>
      <author>一般小随意</author>
      <pubDate>Sun, 01 Dec 2024 10:59:29 +0000</pubDate>
    </item>
    <item>
      <title>用ds9097u修改摩托罗拉对讲机电池数据--IMPRES 2 Battery Reader</title>
      <link>http://www.diybcq.com/thread-147376-1-1.html</link>
      <description><![CDATA[这个有专用的修改软件IMPRES 2 Battery Reader，硬件直接使用我们的ds9097u即可

下面附件是安装包

注意软件使用的com1～com4口，所以安装驱动后要是端口不在这个范围，请修改下
下面以XTS5000对讲机电池为例，接线如下图]]></description>
      <category>美信达拉斯1-wire编程器</category>
      <author>liyf</author>
      <pubDate>Wed, 27 Nov 2024 13:16:16 +0000</pubDate>
    </item>
    <item>
      <title>美信达拉斯1-wire编程器v1.3版驱动（ds9097u）</title>
      <link>http://www.diybcq.com/thread-147236-1-1.html</link>
      <description><![CDATA[美信达拉斯1-wire编程器v1.3版驱动（ds9097u），windows系统通用
，xp系统建议用这个]]></description>
      <category>美信达拉斯1-wire编程器</category>
      <author>liyf</author>
      <pubDate>Wed, 15 May 2024 00:56:06 +0000</pubDate>
    </item>
    <item>
      <title>美信达拉斯1-wire编程器软件onewireviewer</title>
      <link>http://www.diybcq.com/thread-147235-1-1.html</link>
      <description><![CDATA[软件为官方的onewireviewer，有x86（32位）和x64（64位）区分，和win几系统没差别，安装时注意是多少位系统


软件包是msi的，所以安装时确保你的系统msi服务是启动的，要是没启动是没法安装的，很多克隆版系统这个是禁止启动的]]></description>
      <category>美信达拉斯1-wire编程器</category>
      <author>liyf</author>
      <pubDate>Wed, 15 May 2024 00:50:32 +0000</pubDate>
    </item>
    <item>
      <title>美信达拉斯1-wire编程器自主开发软件资源</title>
      <link>http://www.diybcq.com/thread-147234-1-1.html</link>
      <description><![CDATA[有些朋友编程能力不错，喜欢自己折腾软件，毕竟官方的onewireviewer软件使用起来比较别扭的
其实官方是提供有开发接口sdk及部分芯片读写实例代码，有能力自主开发的可以借鉴开发。
下面是官网sdk下载地址：https://www.analog.com/en/resources/evaluation-hardware-a ...]]></description>
      <category>美信达拉斯1-wire编程器</category>
      <author>liyf</author>
      <pubDate>Tue, 14 May 2024 06:19:08 +0000</pubDate>
    </item>
  </channel>
</rss>