DIY编程器网

标题: AVR Programming Dongle [打印本页]

作者: liyf 时间: 2012-1-10 17:14
标题: AVR Programming Dongle

NOTES
Link from J1-3 to J1-11 is cut in STK300 dongle.
Original STK200/300 dongles only connected J1
pins 18 to 21 to GND.
Original STK200/300 dongles did not include J3,
J4, LED1 or R2.
The ribbon cable must be assembled such that
all conductors are "crossed over". This means
1-10, 2-9, ... 10-1.

AvrDongle.PDF (12.85 KB, 下载次数: 0)

欢迎光临 DIY编程器网 (http://www.diybcq.com/)