请选择 进入手机版 | 继续访问电脑版

DIY编程器网

 找回密码
 注册

QQ登录

只需一步,快速开始

扫一扫,访问微社区

查看: 29662|回复: 33

新唐NuLink & NuLinkMe仿真编程器原理图

[复制链接]
发表于 2014-7-1 09:39:33 | 显示全部楼层 |阅读模式
Nuvoton NuLink & NuLinkMe
Nu-Link.jpg
Features:      
  • Supports SW debugging
  • Supports debugging in CoIDE, MDK and IAR
  • Supports Nuvoton ARM Cortex M0 based chips


              
LED Interface Descriptions:
NuLink LED Descriptions:
LED Interface Status Descriptions
ICE LED Red USB Interface configured
ICP ISP LED Green Indicate error occurs
BUSY LED Green Busy, device has been opened
IDLE LED Red Undefined
NuLinkMe LED Descriptions:
LED Interface Status Descriptions
ICE LED Green USB Interface configured
ICP ISP LED Red Indicate error occurs
BUSY LED Red Busy, device has been opened
IDLE LED Green Undefined
Debug Interface (JP8) Descriptions:
Pin Description Pin Description
1 VCC 2 not connected
3 ICE_DAT 4 not connected
5 ICE_CLK 6 not connected
7 ICE_ RST 8 not connected
9 GND 10 not connected
支持芯片:
  • NUC100LC1BN, NUC100LD1BN, NUC100LD2BN, NUC100RC1BN, NUC100RD1BN, NUC100RD2BN
  • NUC100LD3AN, NUC100LE3AN, NUC100RD3AN, NUC100RE3AN, NUC100VD2AN, NUC100VD3AN, NUC100VE3AN
  • NUC120LC1BN, NUC120LD1BN, NUC120LD2BN, NUC120RC1BN, NUC120RD1BN, NUC120RD2BN
  • NUC120LD3AN, NUC120LE3AN, NUC120RD3AN, NUC120RE3AN, NUC120VD2AN, NUC120VD3AN, NUC120VE3AN
  • NUC122LC1AN, NUC122LD2AN, NUC122SC1AN, NUC122SD2AN, NUC122ZC1AN, NUC122ZD2AN
  • NUC123LC2AN1, NUC123LD4AN0, NUC123SC2AN1, NUC123SD4AN0, NUC123ZC2AN1, NUC123ZD4AN0
  • NUC130LC1CN, NUC130LD2CN, NUC130LE3CN, NUC130RC1CN, NUC130RD2CN, NUC130RE3CN, NUC130VE3CN
  • NUC140LC1CN, NUC140LD2CN, NUC140LE3CN, NUC140RC1CN, NUC140RD2CN, NUC140RE3CN, NUC140VE3CN
  • M0516LBN, M0516ZBN, M052LBN, M052ZBN, M054LBN, M054ZBN, M058LBN, M058ZBN
  • Mini51LAN, Mini51ZAN, Mini52LAN, Mini52ZAN, Mini54LAN, Mini54ZAN
nulinkme原理图
QQ图片20140701093644.jpg
NUC1xxNuLinkMe_001BoardSchematicV10.pdf (22.97 KB, 下载次数: 59)
 楼主| 发表于 2014-7-1 11:02:26 | 显示全部楼层
看来这东东的固件也不用去找了,看着只要装了keil驱动,在那个nu-link目录就有两个bin文件,一是ICE_ISP.bin,一是NUC1xx_ICE_M0.bin
发表于 2014-12-24 15:56:53 | 显示全部楼层

好资料 ,赞一个.
不错的资料,支持中。。。
发表于 2015-8-13 23:20:55 | 显示全部楼层
好资料 ,赞一个.
发表于 2015-8-16 15:51:34 | 显示全部楼层
继续回帖吧,不然不够3两
发表于 2015-8-29 21:22:27 | 显示全部楼层
看看.赚银子.
发表于 2017-7-17 11:00:08 | 显示全部楼层
看看.赚银子.
发表于 2017-9-23 10:37:12 | 显示全部楼层
好东西学习了
发表于 2017-10-12 21:38:25 | 显示全部楼层
好像挺不错的样子
您需要登录后才可以回帖 登录 | 注册

本版积分规则

小黑屋|文字版|手机版|DIY编程器网 ( 桂ICP备14005565号-1 )

GMT+8, 2024-3-29 21:32 , 耗时 0.104115 秒, 25 个查询请求 , Gzip 开启.

各位嘉宾言论仅代表个人观点,非属DIY编程器网立场。

桂公网安备 45031202000115号

DIY编程器群(超员):41210778 DIY编程器

DIY编程器群1(满员):3044634 DIY编程器1

diy编程器群2:551025008 diy编程器群2

QQ:28000622;Email:libyoufer@sina.com

本站由桂林市临桂区技兴电子商务经营部独家赞助。旨在技术交流,请自觉遵守国家法律法规,一旦发现将做封号删号处理。

快速回复 返回顶部 返回列表